Handbook - Finite Elemente Software MEANS V14 for FEM Simulations

Request a free Demo for 21 days

Handbook

Contents

MEANS V12

Part 01 - MEANS V12 with a Ribbon-Interface

Part 03 - First FEM-Project - Eccentric Bolt with an Axial Load

Part 04 - Buckling Analysis with MEANS V12

Part 05 - Dynamic Analysis with MEANS V12

Part 07 - BEAM-Analysis with MEANS V12

Part 08 - Contact-Analysis with MEANS V12

Part 10 - Bending and Torsion Moment on a Shaft

Part 11 - FEM-Calculation of a Pedal Crank and a Bottom Bracket Shaft

Part 12 - Mesh Generator for Bearings with FEM-System MEANS V12

Part 13 - Nonlinear Analysis with MEANS V12

Part 14 - FEM-Analysis of a CAD Assembly with MEANS V12

Part 15 - Stationary Temperature-Analysis with MEANS V12

Part 16 - Transient Temperature-Analysis with MEANS V12

Part 17 - Screw-Mesh Generator with MEANS V12

Part 18 - Crane Hook with MEANS-LITE and Assembly

Part 19 - Contact-Analysis_of_a_Polyurethane-Wheel

Part 20 - Excavator bucket with a pivot bearing and a triangluar load

Part 21 - Simplified Drop Test with a Impact Factor

Part 23 - Eccentric Bolt with a local Refinement and Torsional Moment

Part 24 - IPE Beams with a trapezoidal line and surface load

Part 25 - Ventilator with a centrifugal load

Part 26 - Contact-Analysis of a Glass-Balustrade and a Laminated Glass Plate

Part 27 - CAD Assembly with a Node Imprint calculate

Part 28 - Heavy duty trailer with a weight and inertial force with MEANS V12

MEANS V13

Part 29 - Natural Frequencies of an unsupported hollow box with additional masses

Part 30 - Calculation of the Internal Forces from the Bending and Shear Stresses

Part 31 - Temperature Distribution and Heat Flux of a Windows Profile

Part 32 - 3D Mesh Generator SOLIDGEN for Heat-Exchanger and Battery-Structures

Part 33 - Tensile Test Mesh Generator according to ISO 6892 - DIN 50125

Part 34 - Calculating a Square Tube CAD Assembly with MEANS V13

Part 35 - Contact-Analysis of a Clamp Connection with MEANS V13

Part 36 - Calculation a Press Fit with Prescriped Boundary Conditions

Part 37 - Drop Test FEM-Simulation 10 t rock falls on a car roof

Part 38 - FEM-Analysis of a Conical Flange with FEM System MEANS V13

MEANS V14

Part 39 - FEM-Analysis of a Rod End and Bearing Shell using MPC-Elements

Part 40 - Form and Design Optimization with MEANS V14

Part 41 - Nonlinear Contact-Analysis of a Rubber Seal

Back to content